LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Ranger EV >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - 4WAL >> Removal & Installation >> Abs Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. ABS control module is located in left rear corner of engine compartment. Remove Hydraulic Control Unit (HCU) mounting bolts. Lift up on release tab and disconnect ABS control module electrical connector. Remove ABS control module mounting bolts and remove ABS control module from vehicle.
  2. To install, reverse removal procedure. Tighten ABS control module mounting bolts and HCU mounting bolts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals