LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Explorer 2D Utility, 4.0 X, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Speed Control) >> Removal And Installation >> Speed Control Switch >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 2 screws and the speed control switch.
    • Disconnect the speed control switch electrical connector.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.