LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 397 (Body Panel System - Body System - Exterior) >> Removal And Installation >> Liftgate >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Liftgate: Notes

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the D-pillar trim panels and rear coat hooks. For additional information, refer to BODY SYSTEM - INTERIOR .
  2. Position the headliner to access the rear washer hose and the liftgate electrical harness connectors.
  3. Remove the parts in the order indicated in the following illustration and table.
  4. To install, reverse the removal procedure. Transfer components as necessary.
    Fig 1: Removing Liftgate
    G03183690Courtesy of FORD MOTOR CO.