Continuous Memory Self-Test: Description

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Mountaineer, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, and 2001 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Continuous memory self-test is a functional test of PCM performed under any condition (engine running or engine off) with ignition switch turned to ON position. Unlike KOEO and KOER self-tests which can only be activated on demand, continuous monitor is always active in monitoring the system. When a fault is detected, DTC will be stored in memory. This makes it possible to diagnose intermittent faults.

There are 2 types of Continuous Memory DTCs. Emission related DTCs will illuminate the Malfunction Indicator Light (MIL) on instrument cluster. Non-emission DTCs will never illuminate MIL. On emission-related MIL codes, PCM will store DTC in continuous memory at first detection of problem. The MIL will not be illuminated, but DTC is considered by PCM to be a pending DTC. If same problem is detected in next drive cycle, MIL will illuminate. MIL will go out if fault is not present after 3 consecutive drive cycles, or PCM has been reset. An emission-related pending DTC or non-emission DTC will be erased after 40-80 warm-up cycles or PCM reset.