Temperature Blend Door Actuator

WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

The temperature blend door actuator moves the temperature blend door on command from the EMTC module.

The temperature blend door actuator contains a reversible electric motor and a potentiometer. The EMTC module applies a 5-volt signal to one end of the potentiometer and ground to the other. The potentiometer wiper is connected to the actuator output shaft and moves with the output shaft. The voltage available at the wiper indicates the position of the temperature blend door. The actuator wiper voltage is sent to the EMTC module which drives the actuator motor in whichever direction is necessary to make the actuator wiper voltage agree with the expected EMTC module wiper voltage value.

The temperature blend door actuator is located on the heater core and evaporator core housing.