Pinpoint Test B: Unable To Enter Self-Test
WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
B1 CHECK THE COMMUNICATION TO THE ABS MODULE
- Connect the diagnostic tool.
- Key in ON position.
- Check the communication to the ABS module.
- Does the diagnostic tool communicate with the ABS module?
Yes
INSTALL a new ABS module REFER to HYDRAULIC CONTROL UNIT (HCU) . REPEAT the self-test. TEST the system for normal operation.
No
Go to PINPOINT TEST A .