LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Cutaway 5.4 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Module Communications Network) >> Removal & Installation >> Parking Aid Module >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to LOCK position. Disconnect negative battery cable. Remove driver side front and rear scuff plates. Remove safety belt retractor bolts. Lifting from bottom of left "B" pillar, remove left "B" pillar and set aside.
  2. Disconnect Parking Aid Module (PAM) and parking aid speaker connectors. Remove parking aid speaker screws. Remove PAM screws. To install, reverse removal procedure. Tighten safety belt and retractor bolts to 25-33 ft. lbs. (34-45 N.m).
scientia non olet · About LEMON Manuals