Programming Seat Positions
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
Move driver's seat to desired position using driver's side switches. Press memory SET switch which activates SET switch Light Emitting Diode (LED). Within 5 seconds (before LED goes out) select memory position. To select position No. 1, press memory switch button No. 1. To select position No. 2, press memory switch button No. 2. To select position No. 3, press memory switch buttons No. 1 and 2 simultaneously.