LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Escape 2.0 B >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Control Components >> Removal And Installation >> Function Selector Switch >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the function selector switch knob.
    Fig 1: Removing Function Selector Switch Knob
    G01388675Courtesy of FORD MOTOR CO.
  3. Remove the function selector switch.
    • Push in the locking tab on one side of the function selector switch.
      Fig 2: Removing Function Selector Switch
      G01388676Courtesy of FORD MOTOR CO.
    4. NOTE: Align the function selector switch locking tabs with the holes in the housing and press the function selector into the housing. Verify that both locking tabs are secured.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals