Programming/Erasing Personal Code

A unique personal five-digit code can be programmed by following these steps:

1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
2. Press 1/2 within five seconds of Step 1.
3. Enter the unique five-digit code.

   The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it will simply overwrite the previous personal code. To erase a personal code, carry out the following procedure:

4. Enter factory set five-digit code.
5. Press 1/2 within five seconds of Step 1.
6. Press 7/8 and 9/0 at the same time within five seconds of Step 2.

   The system will now only respond to the factory set code.