Accessing Generic OBD-II PIDs

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Using NGS tester, perform the following steps:

• Select VEHICLE & ENGINE SELECTION menu.
• Select NEW VEHICLE, YEAR & MODEL.
• Select GENERIC OBD-II OPTIONS. Press CONT button if monitors are not complete.
• Select PID/DATA MONITOR & RECORD.
• Turn ignition switch to ON position or start engine and allow to idle.
• Follow operating instructions from scan tool menu.
• Select PIDs and press START to begin monitoring. If PID value is not as specified, perform appropriate SYSTEM TEST.