LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Explorer 4.6 W, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Engine System-General Information) >> General Procedures >> Connecting Rod - Bend
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Connecting Rod - Bend

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Connecting Rod Bend On Suitable Alignment Fixture
    G03180087Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals