LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Intake Manifold >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Intake Manifold: Installation

  1. If required, install the new intake manifold gasket.
  2. Follow the removal procedure in reverse order.
    • Install the intake manifold.
    • Install the bolts and nuts.
    • Tighten the bolts and nuts in the sequence shown in Fig 1.
    Fig 1: Tightening Bolts And Nuts In Sequence
    G01370947Courtesy of FORD MOTOR CO.
    Fig 2: Tightening Nut
    G01370948Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals