4R100 Automatic Transmission

Digital Transmission Range (TR) Sensor





Special Tool(s)

Removal
1. With the vehicle in NEUTRAL position it on a hoist.





2. Disconnect the digital transmission range (TR) sensor connector.





3. Disconnect the shift cable at the manual control lever.





4. Remove the digital TR sensor.
1. Remove the bolts.
2. Remove the sensor.

Installation





1. Install the digital TR sensor.
1. Install the sensor.
2. Loosely install the bolts.





2. NOTE: Make sure that the manual control lever is in the neutral position.

Using the special tool, align the digital TR sensor. The tool is designed to fit snug.





3. Tighten the bolts.





4. Reconnect the shift cable at the manual control lever.





5. Reconnect the connector.
6. Lower the vehicle.