Autolock Enable/Disable - Using the Hardwired Keyless Entry Keypad

A manual enable/disable mode allows the autolock feature to be turned off and on.

To enable or disable autolock using the hardwired keyless entry keypad:

1. Enter the 5-digit permanent entry code into the keyless entry keypad.
2. Within 5 seconds of entering the code, press and hold the 7/8 button on the keypad.
3. Within 5 seconds of Step 2, and while holding the 7/8 button, press the 3/4 button on the keypad and release it.
4. Within 5 seconds of Step 3, release the 7/8 button on the keypad.

If the autolock feature is disabled, the horn will chirp once. If the autolock feature is enabled, the horn will chirp once shortly and then sound a second time for a longer sound of the horn once the above sequence is completed.