Connecting Rod, Engine

Clearance of crankshaft without cylinder head desired - 0.0457-0.0660 mm
Clearance of crankshaft without cylinder head allowable - 0.0461-0.0859 mm
Clearance of crankshaft with cylinder head desired - 0.0279-0.0483 mm
Clearance of crankshaft with cylinder head allowable - 0.0276-0.0674 mm
Connecting rod piston pin bore diameter 20.570-20.610 mm
Crankshaft bearing bore diameter 46.89-46.91 mm
Out-of-round limit - piston pin bore 0.008 mm
Taper limit piston pin bore 0.0038/25.4 mm
Length (center to center) 131.905-131.975 mm
Out-of-round-limit - bearing bore 0.010 mm
Taper limit - bearing bore 0.010 mm
Alignment bore-to-bore (max. differential) twist 0.05 mm
Alignment bore-to-bore (max. differential) bend 0.038 mm
Side clearance (assembled to crank) standard 0.092-0.268 mm
Side clearance (assembled to crank) service limit 0.356 mm

Connecting Rod cap Bolts 38 Nm