DTC P0223: Throttle Position (TP2) Sensor Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P0223 - THROTTLE POSITION (TP2) SENSOR CIRCUIT HIGH INPUT
| Description: | The electronic throttle control (ETC) TP2 sensor was flagged as fault status by the powertrain control module (PCM) indicating a high voltage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This fault exhibits a symptom of limited power. A TP2 PID (TP V PID) reading greater than 93% (4.65 volts) in key on engine off (KOEO), continuous memory, or key on engine running (KOER) indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DV: Throttle Body Assembly ETC STEP DV1. | ||