DTC P060B: Internal Control Module A/D Processing Performance
WARNING: This page is about a different variant/trim than selected.
P060B - INTERNAL CONTROL MODULE A/D PROCESSING PERFORMANCE
| Description: | Indicates an error occurred in the powertrain control module (PCM). This DTC is set in combination with P2104 or P2110. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Do not install a new PCM until the following steps are completed. Inspect the harness for damage. Verify correct operation of the sensors using VREF and related circuits. GO to Pinpoint Test C . If the concern or DTC is still present, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||