LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Explorer 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Vehicle Security Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Security Module

VEHICLE SECURITY MODULE


Worldwide Diagnostic System (WDS):






Special Tool(s)







Removal and Installation

CAUTION: Prior to removal of the vehicle security module, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed.

1. Remove the RH rear quarter trim panel.
2. Disconnect the 3 vehicle security module electrical connectors.
3. Remove the 3 vehicle security module screws.
4. Remove the vehicle security module.

5. NOTE: Once the module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.

To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals