October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Output State Control (OSC) Procedures
- Carry out visual inspection and vehicle preparation as necessary.
- Select "Vehicle and Engine Selection" menu.
- Select appropriate vehicle and engine.
- Select "Diagnostic Data Link."
- Select "Powertrain Control Module."
- Select "Diagnostic Test Mode."
- Select "KOEO On-Demand Self Test and KOER On-Demand Self Tests."
- Carry out test and record DTCs.
- Repair all non-transaxle DTCs.
- Repair all VSS and TR sensor DTCs.
- Make sure that VSS/TR sensors are functional.
- Select "Active Command Modes."
- Select "Output State Control."
- Select "Trans-Bench Mode or Trans-Drive Mode."