October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Accelerator Pedal
Courtesy of FORD MOTOR CO.
- Disconnect the accelerator pedal sensor electrical connector.
- Upon installation, make sure that the red lock tab on the electrical connector is fully engaged to ensure a complete connection.
- Remove the 3 accelerator pedal and sensor retaining nuts.
- To install, tighten to 9 Nm (80 lb-in).
- Remove the accelerator pedal and sensor assembly.
- To install, reverse the removal procedure.