October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Spring Lock Couplings: Connect
- Inspect and clean both coupling ends. Install new O-rings and garter springs if necessary.
- Lubricate the O-rings with clean engine oil
Courtesy of FORD MOTOR CO.
- Fit the male fitting into the female end and push until the garter spring snaps over the flared end of the female fitting.
Courtesy of FORD MOTOR CO.
- Make sure the coupling is engaged by pulling on the tubes.
Courtesy of FORD MOTOR CO.
- Install the safety clip.
Courtesy of FORD MOTOR CO.