System Specifications

Engine front cover bolts & stud bolts 19 Nm (14 ft. lbs.)

Cylinder Block Cradle-to-Front Cover Bolts
The 5 bolts may or may not have washers. All the bolts should be of the same type.
Bolts with washers 10 Nm (89 inch lbs.)
Bolts without washers 14 Nm (10 ft. lbs.)

Crankshaft Pulley Bolt
Install a new crankshaft pulley bolt and washer.
First pass 45 Nm (33 ft. lbs.)
Final pass Tighten 85°