LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Edge SE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Transaxle Filler Tube >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Transaxle Filler Tube: Removal

    NOTE: The coolant hoses do not need to be removed from the engine.
  1. Remove the coolant hoses from the transmission fluid filler tube and position aside.
    2. Fig 1: Identifying Coolant Hoses From Transmission Fluid Filler Tube
    GF0031641Courtesy of FORD MOTOR CO.
    NOTE: The coolant hoses have been removed for clarity.
  2. Remove the transmission fluid level indicator.
    3. Fig 2: Identifying Transmission Fluid Level Indicator
    GF0031642Courtesy of FORD MOTOR CO.
    NOTE: The coolant hoses have been removed for clarity.
  3. Remove the nut, rotate the transmission fluid filler tube counterclockwise 90 degrees and remove the transmission fluid filler tube.
    4. Fig 3: Identifying Transmission Fluid Filler Tube
    GF0031643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals