Pinpoint Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle
- F1 CHECK THE SPEED CONTROL CABLE
- Check the speed control cable for correct attachment at the speed control actuator and throttle body.
- Is the speed control cable attached correctly?
- YES
: Go to F2.
- NO
: CONNECT the speed control cable. TEST the system for normal operation.
- F2 CHECK FOR A STICKING OR BINDING SPEED CONTROL CABLE
- Check the speed control cable for sticking or binding.
- Is the speed control cable OK?
- YES
: INSTALL a new speed control actuator. REFER to Speed Control Actuator . TEST the system for normal operation.
- NO
: REPAIR or INSTALL a new speed control cable. REFER to Speed Control Cable . TEST the system for normal operation.