Bench Mode Procedures for SSA, SSB, SSC, SSD, SSE and TCC
Follow operating instructions from the scan tool menu screen:
- Select "Output State Control."
- Select "Trans-Bench Mode."
- Select "PIDs" to be monitored.
- Monitor all selected PIDs during test.
- Select "Parameters - SSA, SSB, SSC, SSD, SSE or TCC."
- Select "ON" to turn solenoid ON.
- Press "SEND" to send command.
- Select "OFF" to turn solenoid OFF.
- Press "SEND" to send the OFF command.
- Select "XXX" to cancel at any time.
- Press "SEND."