System Airflow Description - Electronic Manual Temperature Control (EMTC) System: Panel/Floor

When PANEL/FLOOR is selected:

• the recirc request button is enabled. If the recirc request button is selected (indicator ON), the air inlet door actuator closes off outside air from entering the passenger compartment. If the recirc request button is not selected (indicator OFF), the air inlet door actuator admits only outside air into the passenger compartment.
• the defrost door actuator is in the full closed position, directing airflow to the floor/panel door.
• the floor/panel door actuator is positioned partially between the floor and panel position, directing airflow to the floor duct and the instrument panel A/C registers.
• blended air temperature is available.
• the A/C request button is enabled. The A/C compressor will operate and the indicator will illuminate if the A/C request button is selected and the outside temperature is above approximately 2°C (35°F).
• the blower motor is ON.