System Airflow Description - Electronic Manual Temperature Control (EMTC) System: Defrost

When DEFROST is selected:

• the air inlet door actuator opens, admitting only outside air into the passenger compartment.
• the floor/panel door actuator is in the full floor position.
• the defrost door is in the fully open position, directing airflow to the defroster duct and side window demisters. A small amount of airflow from the floor duct will be present.
• blended air temperature is available.
• the A/C request button will illuminate and is enabled. To reduce fogging, the A/C compressor will operate automatically, regardless of indicator status, if the outside temperature is above approximately 2°C (35°F).
• the blower motor is ON.