Max A/C

When MAX A/C is selected:

• the air inlet door actuator closes off outside air and admits only recirculated air.
• the recirc button is disabled and the indicator is illuminated.
• the defrost door actuator is in the full closed position, directing airflow to the floor/panel door.
• the floor/panel door actuator is in the full panel position, directing airflow to the instrument panel A/C registers. A small amount of airflow from the floor duct will be present.
• blended air temperature is available.
• the A/C request button is illuminated and will be disabled.
• the A/C compressor will operate if the outside temperature is above approximately 2°C (35°F).
• the blower motor is ON.