Component testing procedure
ROOF OPENING PANEL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 14 and 10 | Tilt | Closed circuit |
| Slide | 14 and 8 | Close - 1st detent | Closed circuit |
| 14 and 11 | Auto close - 2nd detent | Closed circuit | |
| 14 and 11 | Open - 1st detent | Closed circuit | |
| 14 and 10 | Auto open - 2nd detent | Closed circuit | |
| Shade | 14 and 5 | Shade close | Closed circuit |
| 14 and 6 | Shade open | Closed circuit |