Removal And Installation
- Upload the audio DSP module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION article.
- Remove the subwoofer speaker. For additional information, refer to Subwoofer Speaker .
- Disconnect the audio DSP module electrical connectors.
- Remove the 2 screws, the nut, and the audio DSP module.
- To install, reverse the removal procedure.
- Download the configuration information to the audio DSP module. For additional information, refer to PMI in MODULE CONFIGURATION article.
NOTE:
Module configuration is only required if a new audio digital signal processing (DSP) module is being installed.