Component testing procedure - Roof opening panel control switch
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE - ROOF OPENING PANEL CONTROL SWITCH
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 12 and 3 | Pull Tilt (UP) | Closed circuit |
| 12 and 8 | |||
| 12 and 3 | Press Tilt (DOWN) | Closed circuit | |
| 12 and 6 | |||
| Slide | 12 and 8 | Pull Slide (UP) | Closed circuit |
| 12 and 6 | Press Slide (DOWN) | Closed circuit |