LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Edge SE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1876 (Engine Controls - Electronic Engine Controls - 3.0L (4V)) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .
    NOTE: PCM replacement DOES NOT require new keys or programming of keys.
  2. Remove the battery tray. For additional information, refer to REMOVAL AND INSTALLATION .
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 bolts and the PCM.
scientia non olet · About LEMON Manuals