LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Focus S, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Removal And Installation >> Driver Air Bag Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Driver Air Bag Module: Installation

  1. Connect the horn switch electrical connector.
    2. Fig 1: Identifying Horn Switch Connector
    GF0043014Courtesy of FORD MOTOR CO.
  2. Connect the driver air bag module electrical connectors.
    3. Fig 2: Identifying Driver Air Bag Module Connectors
    GF0043009Courtesy of FORD MOTOR CO.
  3. Install the driver air bag module to the steering wheel.
    • Firmly press the driver air bag module to engage the 3 driver air bag module wire clips to the steering wheel.
  4. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering  .
scientia non olet · About LEMON Manuals