Component testing procedure - Roof opening panel control switch
ROOF OPENING PANEL CONTROL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt Switch | 12 and 3, 12 and 8 | Push Tilt (UP) | Closed circuit |
| 12 and 3, 12 and 6 | Pull Tilt (DOWN) | Closed circuit | |
| Glass Switch | 12 and 6 | Push Glass (OPEN) | Closed circuit |
| 12 and 8 | Pull Glass (CLOSE) | Closed circuit | |
| Glass Switch | 12 and 4 | Push Shade (OPEN) | Closed circuit |
| 12 and 9 | Pull Shade (CLOSE) | Closed circuit | |
| Tilt/Glass/Shade Switch | 12 and 7, 9, 4, 5, 8, 6, 3 | At rest | Open circuit |