Component testing procedure
WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
EXTERIOR REAR VIEW MIRROR SWITCH COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate | |
|---|---|---|---|---|
| Left mirror | Up | 3 and 5 6 and 1 |
Selector switch Left Adjuster Switch Up |
Closed circuit |
| Down | 3 and 6 5 and 1 |
Selector switch Left Adjuster Switch Down |
Closed circuit | |
| Left | 3 and 8 6 and 1 |
Selector switch Left Adjuster Switch Left |
Closed circuit | |
| Right | 3 and 6 8 and 1 |
Selector switch Left Adjuster Switch Right |
Closed circuit | |
| Right mirror | Up | 3 and 2 6 and 1 |
Selector switch Right Adjuster Switch Up |
Closed circuit |
| Down | 3 and 6 2 and 1 |
Selector switch Right Adjuster Switch Down |
Closed circuit | |
| Left | 3 and 7 6 and 1 |
Selector switch Right Adjuster Switch Left |
Closed circuit | |
| Right | 3 and 6 7 and 1 |
Selector switch Right Adjuster Switch Right |
Closed circuit | |