Section 22 (Brake System - General Information): Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 1, 550-1, 750 ml (3.27-3.69 pt)(1) | ||
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- | - | ||
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc | |
| Front brake disc minimum thickness | 38.4 mm (1.511 in) |
| Rear brake disc minimum thickness (E-150, E-250 and E-350) | 34.4 mm (1.354 in) |
| Rear brake disc minimum thickness (E-450) | 40.4 mm (1.590 in) |
| Brake Pads | |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness (front) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness (rear) | 1.0 mm (0.039 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake master cylinder tube fittings | 23 | 17 | - |
| Front brake caliper bleeder screw | 15 | - | 133 |
| Rear brake caliper bleeder screw | 11 | - | 97 |