Tool Link™ Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- Turn the in-dash computer on.
- Press the tool icon at the bottom RH corner of the screen (or press the tool hardkey).
- Scroll down and select the TOOL LINK icon.
- Select SERVICES, then STATUS.
- The following information (relevant to service) is displayed:
Display Description RFID Antennas (ANT1, ANT2, ANT3) Displays whether each antenna is detected. On vehicles with only 2 antennas, it is normal for ANT3 to display "NOT Detected". Antenna, Tool Link ID, Raw EPC Displays (in this order) the antenna that detected a tag, the tag ID, and the tag serial number.