DTC Chart: HUD Module
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assumes a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.
DTC DESCRIPTION - HUD MODULE
| DTC | Description | Action |
|---|---|---|
| U0104:00 | Lost Communication With Cruise Control Module: No Sub Type Information | GO to PINPOINT TEST B . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST C . |
| U0405:68 | Invalid Data Received From Cruise Control Module: Event Information | This DTC sets when the HUD module receives invalid network data from the C-CM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0422:68 | Invalid Data Received From Body Control Module: Event Information | This DTC sets when the HUD module receives invalid network data from the BCM . RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U210A:16 | Temperature Sensor: Circuit Voltage Below Threshold | GO to PINPOINT TEST D . |
| U210A:17 | Temperature Sensor: Circuit Voltage Above Threshold | GO to PINPOINT TEST D . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs . REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new HUD module. Refer to HEAD UP DISPLAY (HUD) MODULE . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST E . |
| U3003:1C | Battery Voltage: Circuit Voltage Out of Range | GO to PINPOINT TEST F . |