| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to PINPOINT TEST Y. |
| U0155:00 |
Lost Communication With IPC Module: No Sub Type Information |
GO to PINPOINT TEST AA. |
| U0422:00 |
Invalid Data Received from Body Control Module: No Sub Type Information |
REFER to
MULTIFUNCTION ELECTRONIC MODULES
to RETRIEVE and FOLLOW the DTCs
. |
| U0423:00 |
Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information |
REFER to
INFORMATION CENTER - INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES
to RETRIEVE and FOLLOW the DTCs
present in the IPC
. |
| U2100:00 |
Control Module Main Calibration Data: Not Programmed |
- This DTC
sets due to incomplete or incorrect PMI
procedures. CHECK the vehicle service history for recent service actions related to the Global Positioning System Module (GPSM).
- If there have been recent service actions with the Global Positioning System Module (GPSM), REPEAT/PERFORM the PMI
procedure as directed by the diagnostic scan tool. REFER to
PROGRAMMABLE MODULE INSTALLATION (PMI)
.
- If there have been no recent service actions, INSTALL a new Global Positioning System Module (GPSM) to correct the failure to retain configuration data. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
.
|
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
- This DTC
sets due to incomplete or incorrect PMI
procedures. CHECK the vehicle service history for recent service actions related to the Global Positioning System Module (GPSM).
- If there have been recent service actions with the Global Positioning System Module (GPSM), REPEAT/PERFORM the PMI
procedure as directed by the diagnostic scan tool. REFER to
PROGRAMMABLE MODULE INSTALLATION (PMI)
.
- If there have been no recent service actions, INSTALL a new Global Positioning System Module (GPSM) to correct the failure to retain configuration data. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
.
|
| U3000:09 |
Control Module: Component Failure |
CLEAR the DTCs
. REPEAT the self-test. If DTC
U3000:09 is still present, INSTALL a new GPSM
. Refer to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTCs
. REPEAT the self-test. If DTC
U3000:41 is still present, INSTALL a new GPSM
. Refer to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTCs
. REPEAT the self-test. If DTC
U3000:42 is still present, INSTALL a new GPSM
. Refer to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to PINPOINT TEST AF. |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to PINPOINT TEST AG. |