LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus Limited, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System >> Removal And Installation >> Remote Functions Receiver (RFR) Module >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

  1. Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the Remote Functions Receiver (RFR) module electrical connector.
  3. Using a suitable tool (such as a trim removal tool), gently pry the RFR module away from the headliner.
    4. NOTE: The RFR module is secured to the headliner with 3M Duramix® 4747 Super Fast Adhesive at the assembly plant. When installing the RFR module, make sure to use 3M Duramix® 4747 Super Fast Adhesive to secure the RFR module to the headliner in approximately the same position and orientation on the headliner.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals