Removal And Installation
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 lower steering column opening cover bolts.
- Detach the lower steering column opening cover.
- Disconnect the in-vehicle temperature sensor aspirator hose.
- Disconnect the in-vehicle temperature sensor electrical connector.
- Release the 2 in-vehicle temperature sensor clips and remove the in-vehicle temperature sensor.
- Remove the in-vehicle temperature sensor hose and venturi assembly.
- To install, reverse the removal procedure.
NOTE:
The in-vehicle temperature sensor hose and venturi assembly can be accessed from below the driver side of the instrument panel.