LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Transit Connect Base, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Selector Lever: Removal

  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the selector lever cable from the selector lever.
    1. Move the selector lever to the PARK position.
    2. Remove the selector lever cable eyelet from the ball stud.
    3. Squeeze the tabs and remove the selector lever cable from the selector lever assembly.
      Fig 1: Removing Selector Lever Cable From Selector Lever
      G06293309Courtesy of FORD MOTOR CO.
  3. Disconnect the selector lever assembly electrical connector.
    Fig 2: Locating Selector Lever Assembly Electrical Connector
    G06293330Courtesy of FORD MOTOR CO.
  4. Remove the 4 nuts and the selector lever assembly.
    Fig 3: Locating Nuts And Selector Lever Assembly
    G06293331Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals