LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Clutch Controls) >> Diagnosis and Testing >> Clutch Controls >> Pinpoint Test(s) >> Pinpoint Test C
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pinpoint Test C

WARNING: This page is about a different variant/trim than selected.
  1. C1 CHECK CLUTCH FLUID LEVEL 
    • Check clutch fluid level.

    Is the clutch fluid level between the MAX and MIN marks on the brake fluid reservoir? 

    • Yes  : GO to C2 
    • No  : FILL reservoir to specification, CHECK the brake and clutch systems for leaks. TEST clutch system for normal operation.
  2. C2 TEST CLUTCH PEDAL FREE TRAVEL 
    • Manually operate the clutch pedal to the point of resistance and release.
    • Measure pedal travel.

    Is the measured dimension within 0.0394 in (1 mm) - 0.1181 in (3 mm)? 

    • Yes  : GO to C3 
    • No  : GO to  C2
  3. C3 CHECK THE BELLEVILLE SPRING WASHER OF THE CLUTCH PRESSURE PLATE 

    Does the clutch pressure plate or the Belleville spring washer of the clutch pressure plate show signs of wear or damage? 

    • Yes  : INSTALL a new clutch pressure plate.

      REFER to: CLUTCH DISC AND PRESSURE PLATE .

      TEST the system for normal operation.

    • No  : VERIFY the customer concern.
scientia non olet · About LEMON Manuals