LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Transit Connect XLT Premium >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Module Configuration System >> General Procedures >> Accessory Protocol Interface Module (APIM) Programming >> Accessory Protocol Interface Module (APIM) Programming Using the Integrated Diagnostic System (IDS)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accessory Protocol Interface Module (APIM) Programming Using the Integrated Diagnostic System (IDS)

NOTE:
  • If a new Accessory Protocol Interface Module (APIM) is being installed, install a new APIM before carrying out the following procedure. For additional information, refer to INFORMATION SYSTEM AND ENTERTAINMENT SYSTEM .
  • When carrying out the programming procedures, follow the scan tool on-screen directions.
  • Make sure the battery is fully charged before carrying out the programming steps.
  • A hardwired internet connection is strongly recommended when programming.
  • If unable to complete programming because operation stops or errors are received, internet browser settings may need to be configured.
NOTE:
  • For APIM flash programming:
    • The scan tool and a USB male A to male A cable (CCMUSB2-AM-AM-10 or equivalent) are required.
    • The flash procedure deletes any paired phones that were in the SYNC® system.
    • The file for the flash needs to be downloaded from the online database. Allow for extra time for the file to download. The files are approximately 80 megabyte.
scientia non olet · About LEMON Manuals