Body Control Module (BCM) and Instrument Panel Cluster (IPC)

NOTE: The Body Control Module (BCM) and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect both modules. On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.

Module Name	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Car Configuration Parameters
BCM	Yes (through Car Configuration Parameters. Refer to MULTIFUNCTION ELECTRONIC MODULES -- ESCAPE .	Yes	No	NOTE: Do not change car configuration parameters except those listed below. Courtesy wipe disable BLIS® enable/disable Loud speaker quantities (6, 9 or 10) Language Park assist camera Remote start enable/disable Tire size Towbar Trailer module Trailer stability assist
IPC	Yes	Yes	No