LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Explorer Base, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> The Traction Control System Cannot Be Disabled >> PINPOINT TEST M: The Traction Control System Cannot Be Disabled
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

PINPOINT TEST M: The Traction Control System Cannot Be Disabled

  1. M1 CHECK FOR IPC DTCs 
    • Ignition ON.
    • Using a diagnostic scan tool, carry out the IPC  self-test.

    Are any DTCs present in the IPC ? 

    1. Yes  : REFER to INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
    2. No  : GO to M2  .
  2. M2 CHECK THE MESSAGE CENTER TRACTION CONTROL SELECTION 
    • Using the message center buttons, configure the traction control on and then off again. Refer to the Owner's Literature.

    Does the TRACTION CONTROL selection change when configured to on and off? 

    1. Yes  : GO to M3  .
    2. No  : GO to PINPOINT TEST AD .
  3. M3 CHECK THE STABILITY-TRACTION CONTROL DISABLED INDICATOR (SLIDING CAR OFF ICON) 
    • Using the message center buttons, configure the traction control on and then off again. Refer to the Owner's Literature.

    Does the sliding car OFF icon illuminate when the traction control is turned off? 

    1. Yes  : The system is operating correctly at this time. TEST the system for normal operation.
    2. No  : GO to PINPOINT TEST O .
scientia non olet · About LEMON Manuals