Diagnostic Aids
When these DTCs are set the PSCM will remove steering assist and enter manual steering mode. Message center displays STEERING LOSS STOP SAFELY.
DTC U3000:4B alone does not indicate a fault in the PSCM. It indicates an over-temperature condition due to ambient conditions and/or a heavy load on the EPAS system. A heavy load is defined as multiple parking lot maneuvers over a short duration of time with low tire pressure or towing for long distances followed by multiple parking maneuvers. The presence of DTC U3000:4B will prevent the active park assist system (if equipped) from activating. If set during an active park assist event, the event will be terminated and the active park assist system will deactivate.
| Failure | Action |
|---|---|
| 42 | GO to PINPOINT TEST Y |
| 46 | GO to PINPOINT TEST B |
| 49 | GO to PINPOINT TEST B |
| 53 | GO to PINPOINT TEST Y |
| 56 | GO to Pinpoint Test AA |
| 96 | GO to PINPOINT TEST C |
| 4B | DIAGNOSE all other PSCM DTCs before addressing this concern. If no other DTCs are present, CHECK and ADJUST the tire pressures as necessary. If the tire pressures are OK, ADVISE the customer on vehicle operation under heavy loads as described in Diagnostic Aids. |