LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Focus Electric >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering System -- (Electric Vehicle) >> Interactive Diagnostics >> Pinpoint Tests >> Pinpoint Test Z: DTC U0300: Internal Control Module Software Incompatibility >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

  1. Z1: REFLASH AND VERIFY THE PSCM DTC 

    Using a diagnostic scan tool, make sure the PSCM is programmed (flashed) to the latest level of software. Follow all diagnostic scan tool instructions.

    Clear the PSCM DTCs.

    Ignition OFF.

    Wait at least 90 seconds for the modules to completely shut off.

    Ignition ON, engine OFF.

    Does the DTC return? 

    Yes No
    Go to Z2. The condition causing the DTC is not present at this time.
  2. Z2: OBTAIN PSCM RVC 

    Obtain the PSCM RVC.

    INSTALL a new PSCM.
    REFER to Steering Gear  .
scientia non olet · About LEMON Manuals