Body Control Module (BCM) and Instrument Panel Cluster (IPC)

WARNING: This page is about a different variant/trim than selected.

NOTE: The Body Control Module (BCM) and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect both modules. On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.

Module Name	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Car Configuration Parameters
BCM	Yes (through Car Configuration Parameters). Refer to: BODY CONTROL MODULE (BCM) .	Yes	No	NOTE: Do not change car configuration parameters except those listed below. Seat belt warning (Belt-Minder®) English/Metric Language MyKey® Two-stage unlock Autolock/unlock Perimeter alarm Tire size Battery amperage
IPC	Yes	Yes	No